Common Tub Repair Issues In Salt Lake City UT

Because our bathrooms have so many different plumbing fixtures in them, it’s inevitable that these household areas are prone to plumbing repairs—and even emergencies.

One of the most common bathroom issues is a tub repair, and we’ve partnered up with the tub repair salt lake city ut experts at Beehive Plumbing to delve deeper into the common causes of bathtub issues and malfunctions of all types.

So, if your bathtub is currently acting up, it could be due to the following repair issues!

Tub Faucet Leaks

Water leaks occur frequently in bathrooms, and tub faucet leaks just so happen to be pretty frustrating to deal with. The general cause of tub faucet leaks may vary, but there are certain things that you should be on the lookout for.

Aging rubber washers within your faucet’s assembly can sometimes dry out over long periods of time and cause a leak. Damaged or worn rubber washers can also jeopardize the seal between your tub faucet and the metal valve seat, which can allow water to seep through.

Tub Drain Leaks

Bathtub drain leaks are another frustrating tub repair issue that SLC homeowners frequently deal with. Some common warning signs associated with tub drain leaks include water accumulation around a bathtub, or even ceiling seepage below your bathroom floor.

There are many different causes of tub drain leaks, and one major culprit is within your plumbing system’s pipes. You’ll more than likely need to remove the drain and reapply plumber’s putty around the drain’s seal, but this typically isn’t a DIY project and will require professional plumbing assistance.

Low Water Pressure

Low water pressure is always frustrating, especially when the source of the water pressure drop is difficult to pinpoint. The odds are that you’re going to need professional plumbing assistance in order to fully understand the cause of your low water pressure, because these issues are typically rooted back to the depths of a property’s plumbing system.

In places like Salt Lake City, mineral buildup is often the culprit associated with low water pressure, and this often occurs within a bathtub’s faucet cartridge or faucet aerator.

Mold Development

Even if you clean frequently, you can still experience mold development in and around your bathtub. Bathtub mildew is typically caused by:

  • Leaky pipes, sinks or toilets
  • Moisture buildup caused by improper ventilation
  • Damp materials like towels, rugs, etc.

If your bathtub is experiencing a mold problem, you’re likely going to need to strip away your nearby sealant or caulk and replace what’s been impacted. Use vinegar, bleach and hydrogen peroxide to thoroughly clean out your entire bathroom.

Open up doors and windows to allow fresh air to come into your bathroom, or use fans when this isn’t possible.

Contact The Tub Repair Experts At Beehive Plumbing When You’re Experiencing Plumbing Difficulties In Salt Lake City UT!

Tub repairs are a lot more common than most homeowners would probably assume, but the good news is that professional plumbers will have your back when you need help addressing your tub’s underlying issues.

One of the top-rated plumbing companies in Salt Lake City UT is Beehive Plumbing, and their Master Plumbers have supported countless homes with tub repairs over the past 20+ years. You can speak directly with the Beehive specialists to learn more about their tub repair services when you go to their website via the link located at the top of this article!